SP090007 Sloting Plus Motor Speed 7 22.000 Rpm. 22.000 rpm at 12V - 330 gr/cm at 12V - approx. 6,5 UMS

The power delivery of the Speed 7 motor is smooth, linear and always usable. The manufacturer of the electric motor has established an approx. tolerance of +/- 8% in consumption, rpm and magnetism.

ADVICE / RECOMMENDATION:

Before using the motor, it is advisable to lubricate both ends of the axles with a lubricant that penetrates deeply between both parts (bearing/axle).

Our advice is to keep the motor vertical (look the photos) and lubricate by depositing a drop of oil rotating and moving the axle so that it penetrates well. Let stand approx. 20 minutes in this position and repeat on the opposite side.

Subsequently clean the excess of lubricant and connect the motor to a power suply at approx. 5/6V and roll for five minutes so that the brushes adapt to commutator and. -ALWAYS-, in the desired direction of rotation.

After, and once mounted, lightly lubricate the axles before each race removing excess oil so as not to stain the track and the interior of the car.